One-Piece Industry Standard Clamping Coupling with or without Keyway
One-Piece Industry Standard Clamping Coupling with or without Keyway

Bronze Bearing, Die-Cast Housing, Rigid Type


Porous bronze sleeve bearing press-fit in solid zinc die-cast housing, non-corrosive and lightweight with oil hole for lubrication. For use in lighter duty applications. Tolerates -5° to 220° F.


Download Catalog Page >> PDF Format



Bronze Bearing, Die-Cast Housing, Rigid Type
Part No. Bore Dia. (in.) Load Capacity A B C D E F G Wt. Lbs.
PBDC-BR-050 1/2 Max. PV 50,000* 1 1 7/8 3 9/16 2 13/16 5/16 5/8 1 1/8 0.6
PBDC-BR-062 5/8 Max. PV 50,000* 1 1 7/8 3 9/16 2 13/16 5/16 5/8 1 1/8 0.5
PBDC-BR-075 3/4 Max. PV 50,000* 1 1 7/8 3 9/16 2 13/16 5/16 5/8 1 1/8 0.4


image
One-Piece Industry Standard Clamping Coupling with or without Keyway
One-Piece Industry Standard Clamping Coupling with or without Keyway

Bronze Bearing, Pressed Steel Housing, Self-Aligning Type


Two-piece housing has rust-proof plated finish. Can be mounted vertically or horizontally. Spring-lid oil cap can be positioned 4 ways. Porous flanged bronze bearings are press-fit in sturdy zinc die-cast sphere with felt strip for lubrication. Includes 2 rubber grommets to reduce noise and vibration. Tolerates -5° to 220° F. (Rubber grommets replaceable – see below.)


Download Catalog Page >> PDF Format



Bronze Bearing, Pressed Steel Housing, Self-Aligning Type
Part No. Bore Dia. (in.) Load Capacity A B C D E F G Wt. Lbs.
PBPS-BR-050 1/2 Max. PV 50,000* 1 2 3/32 4 3 7/16 9/64 1 1/8 0.5
PBPS-BR-062 5/8 Max. PV 50,000* 1 2 3/32 4 3 7/16 9/64 1 1/8 0.5
PBPS-BR-075 3/4 Max. PV 50,000* 1 2 3/32 4 3 7/16 9/64 1 1/8 0.5
PBPS-BR-100 1 Max. PV 50,000* 1 2 3/32 4 3 7/16 9/64 1 1/8 0.4