Resources
- 3D/2D Drawings
- Custom Part Configurator
- Distributor Locator
- Market Updates
- Technical Data
- Training Module
- Cross Reference
- Our Reputation
- Customer Service
- Hotline
- 800.542.6552
- Fax: 800.860.5553
Ball Bearing, Die-Cast Housing, Rigid Type
(2 Bolt)
Well suited for applications requiring strong load support in limited mounting area. Solid zinc die-cast housing is non-corrosive and lightweight and securely retains bearing by pressing the lip 360 degrees over the outer race. Includes 2 set screws.
Download Catalog Page >> PDF Format
| Ball Bearing, Die-Cast Housing, Rigid Type (2 Bolt) | ||||||||||
| Load Capacity | ||||||||||
| Part No. | Bore Dia.(in.) | Dynamic (Lbs.) | Static (Lbs.) | A | B | C | D | E | F | Wt. Lbs. |
| F2DC-BL-050 | 1/2 | 2152 | 1075 | 3 1/4 | 2 | 2 1/2 | 9/32 Sq. | 1/2 | 1 1/16 | 0.4 |
| F2DC-BL-062 | 5/8 | 2152 | 1075 | 3 1/4 | 2 | 2 1/2 | 9/32 Sq. | 1/2 | 1 1/16 | 0.4 |
| F2DC-BL-075 | 3/4 | 2877 | 1479 | 3 5/8 | 2 1/4 | 2 13/16 | 11/32 Sq. | 1/2 | 1 1/8 | 0.6 |
| F2DC-BL-100 | 1 | 3153 | 1768 | 3 7/8 | 2 1/2 | 3 | 11/32 Sq. | 1/2 | 1 3/16 | 0.7 |
Ball Bearing, Pressed Steel Housing, Self-Aligning, Standard Type
One-piece housing has rust-proof plated finish. Bearing insert is encased in non-conductive, oil resistant rubber liner which corrects up to 2° misalignment while reducing vibration and noise. Includes 2 set screws. (Ball bearing and rubber liner replaceable - see page 5.)
Download Catalog Page >> PDF Format
| Ball Bearing, Pressed Steel Housing, Self-Aligning, Standard Type | ||||||||||
| Load Capacity | ||||||||||
| Part No. | Bore Dia.(in.) | Dynamic (Lbs.) | Static (Lbs.) | A | B | C | D | E | F | Wt. Lbs. |
| F2PS-BL-050 | 1/2 | 2152 | 1075 | 4 | 2 | 3 | 3/8 | 1/16 | 1 | 0.3 |
| F2PS-BL-062 | 5/8 | 2152 | 1075 | 4 | 2 | 3 | 3/8 | 1/16 | 1 | 0.3 |
| F2PS-BL-075 | 3/4 | 2877 | 1479 | 4 1/2 | 2 1/2 | 3 3/8 | 7/16 | 1/16 | 1 1/8 | 0.5 |
| F2PS-BL-100 | 1 | 3153 | 1768 | 4 1/2 | 2 1/2 | 3 3/8 | 7/16 | 1/16 | 1 1/8 | 0.6 |
Ball Bearing, Pressed Steel Housing, Self-Aligning Heavy Gauge Type
Heavy gauge one-piece housing has rust-proof plated finish. Bearing insert with two set screws has longer inner race for added load support. Extra-thick non-conductive rubber liner corrects misalignment up to 2° while reducing vibration and noise.
Download Catalog Page >> PDF Format
| Ball Bearing, Pressed Steel Housing, Self-Aligning Heavy Gauge Type | ||||||||||
| Load Capacity | ||||||||||
| Part No. | Bore Dia.(in.) | Dynamic (Lbs.) | Static (Lbs.) | A | B | C | D | E | F | Wt. Lbs. |
| F2PH-BL-050 | 1/2 | 2877 | 1479 | 5 | 3 | 4 | 7/16 | 3/32 | 1 3/4 | 1.0 |
| F2PH-BL-062 | 5/8 | 2877 | 1479 | 5 | 3 | 4 | 7/16 | 3/32 | 1 3/4 | 1.1 |
| F2PH-BL-075 | 3/4 | 2877 | 1479 | 5 | 3 | 4 | 7/16 | 3/32 | 1 3/4 | 0.9 |
| F2PH-BL-100 | 1 | 3153 | 1768 | 5 | 3 | 4 | 7/16 | 3/32 | 1 3/4 | 1.0 |
Bronze Bearing, Pressed Steel Housing, Self-Aligning Type
Two-piece housing has rust-proof plated finish. Spring-lid oil cap is at 45° and can be mounted vertically or horizontally. Porous flanged bronze bearings are press-fit in sturdy zinc die-cast sphere with felt strip for lubrication Includes 2 rubber grommets for mounting to reduce noise and vibration. Tolerates -5° to 220° F. (Rubber grommets replaceable – see below.)
Download Catalog Page >> PDF Format
| Bronze Bearing, Pressed Steel Housing, Self-Aligning Type | |||||||||
| Part No. | Bore Dia.(in.) | Load Capacity | A | B | C | D | E | F | Wt. Lbs. |
| F2PS-BR-050 | 1/2 | Max. PV 50,000* | 4 3/8 | 2 3/4 | 3 3/8 | 7/16 | 1/8 | 1 1/8 | 0.6 |
| F2PS-BR-062 | 5/8 | Max. PV 50,000* | 4 3/8 | 2 3/4 | 3 3/8 | 7/16 | 1/8 | 1 1/8 | 0.6 |
| F2PS-BR-075 | 3/4 | Max. PV 50,000* | 4 3/8 | 2 3/4 | 3 3/8 | 7/16 | 1/8 | 1 1/8 | 0.6 |
| F2PS-BR-100 | 1 | Max. PV 50,000* | 4 3/8 | 2 3/4 | 3 3/8 | 7/16 | 1/8 | 1 1/8 | 0.4 |
UHMW-PE Bearing, Pressed Stainless Steel Housing, Self-Aligning Type
USDA and FDA approved. -60° to 180° F temperature range. For wash down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact and abrasion. Interchangeable with most metal units. Two-piece stainless steel housing units. (UHMW-PE bearing replaceable - see page 5.)
Download Catalog Page >> PDF Format
| UHMW-PE Bearing, Pressed Stainless Steel Housing, Self-Aligning Type | |||||||||
| Part No. | Bore Dia.(in.) | Load Capacity | A | B | C | D | E | F | Wt. Lbs. |
| F2SS-UH-050 | 1/2 | Max. PV 3,000* | 4 3/8 | 2 3/4 | 3 3/8 | 7/16 | 1/8 | 1 1/8 | 0.2 |
| F2SS-UH-062 | 5/8 | Max. PV 3,000* | 4 3/8 | 2 3/4 | 3 3/8 | 7/16 | 1/8 | 1 1/8 | 0.3 |
| F2SS-UH-075 | 3/4 | Max. PV 3,000* | 4 3/8 | 2 3/4 | 3 3/8 | 7/16 | 1/8 | 1 1/8 | 0.3 |
| F2SS-UH-100 | 1 | Max. PV 3,000* | 4 3/8 | 2 3/4 | 3 3/8 | 7/16 | 1/8 | 1 1/8 | 0.3 |
Ball Bearing, Die-Cast Housing, Rigid Type (4 Bolt)
Well suited for applications requiring strong load support in limited mounting area. Solid zinc die-cast housing in non-corrosive and lightweight and securely retains bearing by pressing the lip 360 degrees over the outer race. Includes 2 set screws.
Download Catalog Page >> PDF Format
| Ball Bearing, Die-Cast Housing, Rigid Type (4 Bolt) | ||||||||||
| Load Capacity | ||||||||||
| Part No. | Bore Dia.(in.) | Dynamic (Lbs.) | Static (Lbs.) | A | B | C | D | E | F | Wt. Lbs. |
| F4DC-BL-050 | 1/2 | 2152 | 1075 | 3 | 1 13/16 | 2 1/8 | 3/8 | 3/8 | 1 1/32 | 0.6 |
| F4DC-BL-062 | 5/8 | 2152 | 1075 | 3 | 1 13/16 | 2 1/8 | 3/8 | 3/8 | 1 1/32 | 0.7 |
| F4DC-BL-075 | 3/4 | 2877 | 1479 | 3 3/8 | 2 1/8 | 2 1/2 | 3/8 | 7/16 | 1 1/8 | 0.9 |
| F4DC-BL-100 | 1 | 3153 | 1768 | 3 3/4 | 2 5/16 | 2 3/4 | 7/16 | 7/16 | 1 1/4 | 1.2 |
UHMW-PE Bearing, Solid-Rigid Type (4 Bolt)
Entire unit is UHMW-PE. USDA and FDA approved. -60° to 180° F temperature range. For wash down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact and abrasion. Interchangeable with most metal units.
Download Catalog Page >> PDF Format
| UHMW-PE Bearing, Solid-Rigid Type (4 Bolt) | |||||||||
| Part No. | Bore Dia.(in.) | Load Capacity | A | B | C | D | E | F | Wt. Lbs. |
| F4UH-UH-050 | 1/2 | Max. PV 3,000* | 3 | -- | 2 1/8 | 7/16 | -- | 1 1/4 | 0.4 |
| F4UH-UH-062 | 5/8 | Max. PV 3,000* | 3 | -- | 2 1/8 | 7/16 | -- | 1 1/4 | 0.6 |
| F4UH-UH-075 | 3/4 | Max. PV 3,000* | 3 3/8 | -- | 2 1/2 | 7/16 | -- | 1 1/4 | 0.6 |
| F4UH-UH-100 | 1 | Max. PV 3,000* | 3 3/4 | -- | 2 3/4 | 7/16 | -- | 1 1/4 | 0.6 |
UHMW-PE Bearing, Solid-Rigid Type (2 Bolt)
Entire unit is UHMW-PE. USDA and FDA approved. -60° to 180° F temperature range. For wash down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact and abrasion. Interchangeable with most metal units.
Download Catalog Page >> PDF Format
| UHMW-PE Bearing, Solid-Rigid Type (2 Bolt) | |||||||||
| Part No. | Bore Dia.(in.) | Load Capacity | A | B | C | D | E | F | Wt. Lbs. |
| F2UH-UH-050 | 1/2 | Max. PV 3,000* | 4 7/16 | 2 1/2 | 3 9/16 | 7/16 | -- | 1 1/2 | 0.5 |
| F2UH-UH-062 | 5/8 | Max. PV 3,000* | 4 7/16 | 2 1/2 | 3 9/16 | 7/16 | -- | 1 1/2 | 0.5 |
| F2UH-UH-075 | 3/4 | Max. PV 3,000* | 4 7/16 | 2 1/2 | 3 9/16 | 7/16 | -- | 1 1/2 | 0.5 |
| F2UH-UH-100 | 1 | Max. PV 3,000* | 4 15/16 | 2 3/4 | 3 7/8 | 7/16 | -- | 1 1/2 | 0.5 |