Motor & Grinder Shaft Arbors

• Nut Lock Type – for smooth shafts
• For mounting various wheels (buffs, wire brush, non-woven, etc.)
• Arbor is secured to smooth motor shafts with socket set screws
• RH (right-hand) units with ½”-20 threaded arbors can also be used to mount Climax keyless chucks to drive various shank-mounted accessories
• Use RH (right-hand) type for counter-clockwise shaft rotation (facing shaft)
• Use LH (left-hand) type for clockwise shaft rotation (facing shaft)

Download Catalog Page >> PDF Format

Type A “Small”
This type is ideal for use on smaller fractional horse-power motors.

Type B “Standard”
These Arbors have a 1/2” diameter threaded portion that is 1-13/16” long which can accommodate wheels up to 1-1/4” wide.

*AL-5-KW and AS-5-KW have a keyway.

Type C “Extra Long”
Similar to Type B except the threaded portion is longer at 2-5/8” which can accommodate wheels up to 2” wide.

Type D “Heavy Duty”
Designed especially for larger buffing & polishing units. The wide shoulder provides plenty of clearance plus ample space for easy movement & positioning of work pieces.

Type E “Screw Lock” for Threaded Shafts
Designed for Threaded Shafts. Hex adapter can be used with longer screws to mount thicker wheels.