Resources
- 2D Dwgs/3D Models
- Distributor Locator
- Market Updates
- Technical Data
- Instructional Data
- Cross Reference
- Our Reputation
- Customer Service
- Hotline
- 800.542.6552
- Fax: 800.860.5553
2D Drawings
& 3D Models
AVAILABLE
*KLD Coming Soon
Cone Point Mandrels
- Tapered threaded mandrels for use with abrasive cone points
- Sharp spiral threads are formed to provide a “self-locking” feature for the cones
Download Catalog Page >> PDF Format
| Cone Point Mandrels | |||||
| Catalog # | Shank Dia. | Taper Degree | Taper Length | Major Dia. | O.A.L. |
| CPM-1 | 1/4 | 12 | 1 3/8 | 3/8 | 2 3/4 |
| CPM-2 | 1/4 | 6 | 1 1/2 | 1/4 | 3 1/16 |
| CPM-3 | 1/4 | 6 | 2 1/2 | 3/8 | 3 13/16 |
| CPM-4 | 1/4 | 5 | 3 | 3/8 | 4 7/16 |
| CPM-5 | 1/4 | 15 | 1 7/8 | 9/16 | 3 1/8 |
| CPM-6 | 1/4 | 18 | 1 7/8 | 11/16 | 3 5/16 |
| CPM-7 | 1/4 | 22 | 1 9/16 | 3/4 | 3 5/16 |
| CPM-8 | 1/4 | 30 | 1 7/8 | 1 | 3 3/8 |
| CPM-9 | 1/4 | 12 | 2 9/16 | 5/8 | 4 1/4 |
| CPM-11 | 1/8 | 6 | 1 | 3/16 | 2 3/4 |
2D Drawings
& 3D Models
AVAILABLE
*KLD Coming Soon
Slotted Head Quick Change Mandrels
- Holds abrasive sheets which are secured in slot and rolled around the head
- Excellent for sanding or finishing internal holes
- Rust proof finish
Download Catalog Page >> PDF Format
| Slotted Head Quick Change Mandrels | ||||
| Catalog # | Slot Dia. | Slot Width | Depth | O.A.L. |
| SM-3-250 | 1/4 | 1/16 | 3/4 | 3 |
| SM-4-250 | 1/4 | 1/16 | 3/4 | 4 |
| SM-6-250 | 1/4 | 1/16 | 3/4 | 6 |
| SM-8-250 | 1/4 | 1/16 | 3/4 | 8 |
| SM-10-250 | 1/4 | 1/16 | 3/4 | 10 |
| SM-12-250 | 1/4 | 1/16 | 3/4 | 12 |
2D Drawings
& 3D Models
AVAILABLE
*KLD Coming Soon
Chuck Type Wheel Mandrels
- These adapters fit wheels 1/4” to 3/8” wide
- Use with wire wheel brushes, small grinding wheels, buffs, etc.
- Rust proof finish
Download Catalog Page >> PDF Format
| Chuck Type Wheel Mandrels | |||||
| Fits Catalog # | Wheel Hole | Shank Widths | Flange Dia. | Dia. | O.A.L. |
| WS-22 | 1/4 | 1/4 to 3/8 | 1/4 | 9/16 | 2 1/8 |
| WS-23 | 3/8 | 1/4 to 3/8 | 1/4 | 11/16 | 2 1/8 |
| WS-24 | 1/2 | 1/4 to 3/8 | 1/4 | 3/4 | 2 1/8 |
2D Drawings
& 3D Models
AVAILABLE
*KLD Coming Soon
Mandrels for Non-Woven Abrasives
Download Catalog Page >> PDF Format
| Mandrels for Non-Woven Abrasives | ||||||
| Catalog # | Fits Hole | Wheel Widths up to (in): |
Wheel Dia. up to (in): |
Shank Dia. | Washer Dia. | O.A.L. |
| H-808-1 | 1/8 - 3/16 | 3/4 | 2 | 1/8 | 7/16 | 1 3/4 |
| H-808-2 | 1/4 - 5/16 | 1 | 2 | 1/4 | 5/8 | 2 1/4 |
| H-938-2* | 1/4 - 5/16 | 1 | 3 | 1/4 | 2 | 2 1/4 |
| H-1608-2 | 1/4 - 5/16 | 1 | 3 | 1/4 | 1 | 2 1/4 |
*H-938-2 comes with one flat two inch diameter washer and one dished-tooth washer.