Sanding Sleeve 80-Grit

Spiral Coated Abrasive Sanding Sleeves Medium 80-Grit

For sizes 1” x 1” and smaller sold in bulk quantities of 100
For sizes larger than 1” x 1” sold in bulk quantities of 50
Spindle Drum Sanding Sleeves are sold per piece

For Solid Rubber Drums
Spiral coated-abrasive bands with resin-bond aluminum oxide and hard cloth back
For sanding & polishing curves, corners, flat and irregular surfaces of all types of material

Download Catalog Page >> PDF Format

Sanding Sleeves for Sanding Drum Width
Dia.	1/2"	3/4"	1"	1-1/2"	2"	3"
1/4"	SS-004008-080A		SS-004016-080A			SS-004048-080A
3/8"	SS-006008-080A		SS-006016-080A			SS-006048-080A
1/2"	SS-008008-080A	SS-008012-080A	SS-008016-080A		SS-008032-080A	SS-008048-080A
5/8"					SS-010032-080A	SS-010048-080A
3/4"	SS-012008-080A	SS-012012-080A	SS-012016-080A	SS-012024-080A	SS-012032-080A	SS-012048-080A
1"			SS-016016-080A	SS-016024-080A	SS-016032-080A	SS-016048-080A
1-1/2"			SS-024016-080A	SS-024024-080A	SS-024032-080A	SS-024048-080A
2"			SS-032016-080A	SS-032024-080A	SS-032032-080A	SS-032048-080A
2-1/4"						SS-036048-080A
2-1/2"
3"						SS-048048-080A

* Additional Grits & Sizes available - priced on request. Minimum quantity applies to non-cataloged items.
* Sanding Sleeves have a limited shelf life and should be used within 6 months of purchase.

Sanding Sleeves for Spindle Drum Width
Dia.	4-1/2"	5-1/2"	6"	9"
1/4"		SS-004088-080A	SS-004096-080A
3/8"		SS-006088-080A	SS-006096-080A	SS-006144-080A
1/2"	SS-008072-080A	SS-008088-080A	SS-008096-080A	SS-008144-080A
5/8"	SS-010072-080A	SS-010088-080A	SS-010096-080A
3/4"	SS-012072-080A	SS-012088-080A		SS-012144-080A
1"	SS-016072-080A	SS-016088-080A		SS-016144-080A
1-1/2"	SS-024072-080A	SS-024088-080A		SS-024144-080A
2"	SS-032072-080A	SS-032088-080A		SS-032144-080A
2-1/4"
2-1/2"
3"	SS-048072-080A	SS-048088-080A		SS-048144-080A