Sanding Sleeve 120-Grit

Spiral Coated Abrasive Sanding Sleeves Fine 120-Grit

For sizes 1” x 1” and smaller sold in bulk quantities of 100
For sizes larger than 1” x 1” sold in bulk quantities of 50
Spindle Drum Sanding Sleeves are sold per piece

For Solid Rubber Drums
Spiral coated-abrasive bands with resin-bond aluminum oxide and hard cloth back
For sanding & polishing curves, corners, flat and irregular surfaces of all types of material

Download Catalog Page >> PDF Format

Sanding Sleeves for Sanding Drum Width
Dia.	1/2"	3/4"	1"	1-1/2"	2"	3"
1/4"	SS-004008-120A		SS-004016-120A	SS-004024-120A		SS-004048-120A
3/8"	SS-006008-120A		SS-006016-120A	SS-006024-120A	SS-006032-120A
1/2"	SS-008008-120A	SS-008012-120A	SS-008016-120A	SS-008024-120A	SS-008032-120A	SS-008048-120A
5/8"		SS-010012-120A			SS-010032-120A
3/4"	SS-012008-120A	SS-012012-120A	SS-012016-120A	SS-012024-120A	SS-012032-120A	SS-012048-120A
1"			SS-016016-120A	SS-016024-120A	SS-016032-120A	SS-016048-120A
1-1/2"			SS-024016-120A	SS-024024-120A	SS-024032-120A	SS-024048-120A
2"			SS-032016-120A	SS-032024-120A	SS-032032-120A	SS-032048-120A
2-1/4"						SS-036048-120A
3"			SS-048016-120A		SS-048032-120A	SS-048048-120A

* Additional Grits & Sizes available - priced on request. Minimum quantity applies to non-cataloged items.
* Sanding Sleeves have a limited shelf life and should be used within 6 months of purchase.

Sanding Sleeves for Spindle Drum Width
Dia.	4-1/2"	5-1/2"	6"	9"
1/4"		SS-004088-120A	SS-004096-120A
3/8"		SS-006088-120A	SS-006096-120A	SS-006144-120A
1/2"	SS-008072-120A	SS-008088-120A	SS-008096-120A
5/8"		SS-010088-120A	SS-010096-120A
3/4"	SS-012072-120A	SS-012088-120A	SS-012096-120A	SS-012144-120A
1"	SS-016072-120A	SS-016088-120A	SS-016096-120A
1-1/2"	SS-024072-120A	SS-024088-120A	SS-024096-120A	SS-024144-120A
2"	SS-032072-120A	SS-032088-120A	SS-032096-120A	SS-032144-120A
2-1/4"
3"	SS-048072-120A	SS-048088-120A		SS-048144-120A